Dermal Piercing: Everything You Need to Know

What is Dermal Piercing?

Dermal Piercing
Photo: Grazia Daily

Piercing that is so tiny that they lie flush with the skin’s surface is known as micro dermal piercing. These piercings are also known as single-point piercings. Because a dermal anchor is inserted beneath the skin rather than through the skin, there is no requirement for an entry and exit site.

This makes it possible to achieve the look of a completely smooth surface. The length of this anchor is just around six or seven millimeters, but because the top of it rests on the epidermis, it gives the appearance that there are beads directly under the skin. As a last step in the attachment process, the piece of jewelry is screwed into the top of the post.

“It’s basically a single-point piercing that is anchored to hold tight to the surface of the skin with a gorgeous gemstone or flat piece of jewelry on top,” explains Jessie Darling, a professional body piercer at Ontario, Canada’s Taunton Tattoo Company. “It’s basically a single point piercing that is anchored to hold tight to the surface of the skin,” The article goes on to say that the areas around the eyes, the collar bones, the back dimples, the arms, the hips, and the chest are the most common places that dermal fillers are employed.

Why Dermal Piercing is so popular?

Dermal piercings are very widespread because they can be placed on any level section of the skin. This makes it possible to modify parts of the body that would be difficult to pierce in any other way. However, you should be aware of people who say they want a dermal piercing but in reality, want a surface piercing instead.

The difference between the two can be summarized by the fact that a barbell used in a surface piercing is always visible and has a clearly defined point of entry and departure in the skin. Pinch the skin, insert a needle to create a “passageway” for the jewelry, and then push a barbell into the flesh so that the ends stick out and the middle is buried.

Find a Piercer Near You

The Process

A dermal piercing is a simple technique that calls for significantly less skill than it appears to demand. The piercer will first clean your skin to reduce the risk of infection in the fresh cut, and then they will make a small mark in the area where the jewelry will be placed. The piercer will quickly create a hole in the skin using a skin punch or needle in order to accommodate the jewelry. This hole will be in the desired location.

After that, the piercer will either use their hands or a very small pair of forceps to insert the jewelry’s anchor into the opening until it is completely concealed beneath the surface of the skin. After the base has been securely fastened into place, the top can either be bolted on or simply set in place. The entire process is completed in a relatively short period of time; nevertheless, an experienced piercer will spend more time sterilizing than actually performing the piercing itself.

After the area has been sufficiently disinfected, it will be marked with a marker to ensure that both you and she are satisfied with the placement. After that, Piercer will use a dermal punch to remove a very little amount of skin that is between 1.5 and 2 millimeters.

Following this, they will use a taper tool to create a depression in which the anchor base will be able to fit securely. At last, the piercer put an anchor base with a decorative topping into our pocket and give it a gentle tap to make sure it is in the correct position. You’ve just been granted a dermal!

Consequences of Skin Piercings or Dermal Piercing

Infection

If you don’t care for your new piercing properly, you risk infection. Get medical help if you have severe pain, heat, yellow or green pus, swelling, a rash, or an objectionable odor. 1 Jewelry may shift, droop, or fall away from its fastener. If your dermal piercing develops any of these symptoms, seek medical assistance to prevent infection.

Disruption of tissue

Untreated piercing infections might spread to other body parts. Incorrect piercing can cause catastrophic tissue damage. Too-deep dermal piercings might embed and reject. Too-shallow piercings can shift.

Hypergranulation

A red mass near the piercing site is also a worry. If the piercing site is under too much pressure, such as from tight jewelry or clothing, a bump may form. Foreign object insertion may cause this problem.

Displacement

If the anchors are not implanted deeply enough into the dermis, they have the potential to move to different places of the body.

Scarring

If the piercing is removed for any reason, including rejection, a little scar will emerge in the healed hole. This can happen for a variety of reasons.

The Difference Between Dermal vs. Surface Piercings

Photo: Pexels.com

Surface piercings and dermal piercings are sometimes confused with one another; nonetheless, there is a substantial distinction between the two types of piercings. A dermal piercing can be placed beneath any level section of the body, despite the fact that it is visible on the surface of the skin. When having a surface piercing, pinch the skin in the desired spot to provide an entry and exit point for open jewelry like a barbell. This is done while the piercing is being done.

What is the estimated Cost of Dermal Piercing

Dermal piercings cost $70 to $100 per studio. Many places charge extra for jewelry on top of the piercing operation, so budget $10 – $50 for high-quality metal. The base price and jewelry price aren’t the only factors. More than 20% is appreciated for a piercer’s hard work. Tattoo artists also do this. Saline solution and bandages are added to the service fee. Calling the business ahead of time to ask what they charge and what they recommend for aftercare will help you prepare for your appointment.

What are the popular areas for dermal piercing?

Any part of the body that has flat skin can have a dermal piercing performed on it. The only requirement is that the area of skin be flat or smooth.

People commonly prefer these areas:

Popular areas include the:

  • cheekbones
  • nape of the neck
  • chest
  • lower back
  • abdomen
  • thighs

Which types of metals and stones are used to make the jewelry for Dermal Piercing?

dermal piercing
Photo: Tattoofiesta.com
  • Surgical titanium: Titanium has the potential to be the least irritating metal for persons who have sensitive skin.
  • Surgical stainless steel: TatRing claims that this particular ingredient is the one that is in the highest demand. Despite the fact that it is hypoallergenic, there is still a possibility that it will cause irritation.
  • Niobium: This material, like the one described earlier, is resistant to corrosion and does not trigger allergic reactions in most people.
  • Gold: High-quality gold is important because it’s precious. Wear yellow or white 14-karat gold while healing. Higher-karat gold isn’t as durable. Gold-plated jewelry can cause diseases and allergies.

How exactly does one get this piercing done?

A dermal piercing can be performed using either a needle or a skin punch. Both of these instruments are used to puncture the skin. The anchoring of the device subcutaneously is a component that is shared by both approaches.

A dermal piercing requires the following in order for needles to be used:

  • Before beginning the piercing process, the piercer will carefully clean and disinfect the region that will be punctured.
  • When the skin is completely dry, a mark will be placed on it with a pen or marker so that the piercer knows where to start.
  • After the needle has been introduced beneath the surface of the skin, it will be removed again. This creates a “pocket” in which the anchor can find a comfortable resting place.
  • Your piercer will almost certainly make use of forceps in order to place the base of the anchor into the hole. They will manipulate the jewelry so that it is firmly embedded under your skin until it is ready to be worn.
  • After that, your piercer will secure the jewelry top to the anchor by using a screw.

The method used to make the hole in the skin for a dermal piercing with a skin punch is identical to the method used for a needle piercing; the only difference is that the piercer uses a punch rather than a needle. With the use of the skin punch, a little portion of the tissue is cut away in order to make space for the anchor.

How long will a healed piercing remain visible after it has completely healed?

Recovery period following a dermal piercing cannot be accurately predicted. In spite of this, the anchor will be forced to the surface as your skin continues to thicken and unfurl, at which point it will be evacuated. It’s possible that this might happen at any point between now and three years from now, depending on how well you take care of the piercing.

Aftercare of Dermal Piercing

Once a day, remove the Band-Aid, cleanse the wound, and reapply. After seven days, a Band-Aid is no longer needed, but skin cleanliness is still important. Cover the piercing for the recommended time to help it heal. Once it’s exposed, you should clean it twice a day with sea salt or saline solution, removing any crusty buildup and patting the piercing dry to avoid bacteria spread. Avoid submerging a healing piercing. In rainy weather, a cover may keep water out of the piercing.

Unobvious elements can impede the body’s normal repair. If the piercing is near your hairline, wear your hair up so the jewelry doesn’t get tangled. Tight clothes might cause infection at the piercing site. Due to the potential of harm from collisions and infection from perspiration, high-intensity sports and workouts should be done with prudence. To guarantee optimal healing, just clean or replace the piercing.

Instructions for Swapping the Crowning Glory of Your Jewelry

dermal piercing
Photo: Depositphotos.com

After your dermal piercing has completely healed, the top of the external jewelry can be changed without risk to the piercing (in about three months). If you want to prevent issues such as the anchor being knocked out of place by mistake, you should have your piercer perform it.

If you are adamant about handling the transaction on your own, the following is a guide for changing the jewelry cap:

  • You should thoroughly wash your hands with antibacterial soap before interacting with the area.
  • Utilizing a saline or sea salt solution, clear the area of any debris.
  • Continue doing so until the area is completely dry.
  • To remove the current jewelry cap, spin it so that it faces in the other direction of the clock. First, you should attempt to free the bottom, and if it doesn’t work, you should visit your piercer. Your piercer has the option of using forceps to remove the jewelry from your body if you like.
  • It is recommended that the new jewelry cap be screwed on in a clockwise direction.
  • Once more, wash the area and then dry it off completely.

The proper method for removing the dermal piercing

Consult a piercer in the event that you ever make the decision to remove the dermal piercing. You should never attempt to remove a piercing of this kind on your own. It could be dangerous.

  • To eliminate any dirt or debris from the skin, first wash it with a sterile cleansing solution and then pat it dry.
  • To access the gems, you must first remove the cover.
  • Scrub the region to break up the anchor, if that’s what it takes.
  • Create with the scalpel an incision that is proportional in size to the base of the anchor.
  • You can remove any scar tissue that has formed around the anchor by using the scalpel to make the incisions.
  • Make use of forceps in order to extract the anchor from the skin.
  • Put a bandage or a suture on the wound, and then dress it.